Soff Cut 150 Husqvarna Concrete Saw w/ FREE 6" BLADE
The Husqvarna Soff-Cut 150 saw is designed for residential and light commercial applications. The lightest gas saw in the Soff-Cut range, the 150 is designed for ease of use and convenience. Features include a patented low noise blade enclosure which allows the unit to be used in residential areas with minimal disruption. In addition, the low-dust blade block system allows the saw to cut dry, and it controls the debris for easy cleanup.
Couldn't load pickup availability
Product Reviews
Product Reviews
Customer Reviews








Notified by email when this product becomes available

$3,095.00
Additional Info
HUSQVARNA SOFF CUT 150 EARLY ENTRY CONCRETE SAW
SAW COMES WITH FREE FLX 6" SOFF CUT PURPLE BLADE - FLX SERIES VALUE $89
DUST PORT INCLUDED, BLADE AVAILABLE SEPARATELY. CHECK OUT THE NEW AND IMPROVED GUIDE POINTER WITH DUAL SIDE SUPPORT! (SEE PICTURES)
Applications
- Honda 4.8 hp engine
-
Push saw designed for residential and light commercial contractors where depth of 1-1/2" is needed.
Benefits
- Increased depth of cut when using new 6.5" blades.
- Gasoline saw with easy pull-start engine facilitates fast, reliable starts.
- The low-noise blade block enclosure reduces noise and dust impact on surrounding areas when cutting in the Green Zone.
- Mechanical blade depth control enables operator to quickly raise and lower the saw.
TECHNICAL SPECIFICATIONS
Blade, in | 6.5" | 6" | 4" |
Cutting depth, in | 1-1/2" | 1-3/16" | 1/2" |
THE PROBLEM
As concrete hydrates and begins to set, it develops internal stresses. The objective in controlling shrinkage cracking is to relieve these stresses before they seek their own relief in the form of a random crack.
THE SOLUTION
With the Husqvarna Soff-Cut Ultra Early Entry dry-cutting system, joints are saw cut in the Green Zone - within the first hour or two after finishing. The Husqvarna Soff-Cut technology is based on the combination of the Soff-Cut blade and skid plate. The up-cutting rotation of the blade combines with the skid plate, which applies pressure to the surface to prevent chipping and spalling. To effectively control shrinkage cracking, Soff-Cut allows you to cut in the Green Zone as part of the finishing process.
Blade range, in | 6.5" / 4" |
Depth of cut, in | 1.5" / .5" |
Engine Specifications | Honda |
Maximum power, hp | 4.8 |
Power source | Gasoline |
Average bladeshaft, rpm | 3,800 |
Blade flanges, in | 3" |
Displacement, cu in | 10.8 |
Bore / Stroke | 2.7 / 1.9 |
Arbor size | Triangular |
Bladeshaft diameter, in | 3/4" |
Cylinders / cycle | 1/4 |
Fuel capacity, gal | 0.7 |
Air filter | Dry type dual element w/ precleaner |
Starter | Recoil |
Engine cooling | Air |
Axle front / rear, in | 1" - 1" |
Blade guard type | Enclosed |
Number of belts | 1 |
Blade depth control | Manual |
Oil capacity, qt | .63 |
Handlebar adjustment | Folding / fixed with locking pin |
Transmission type | Push |
Maximum weight crated, lbs | 100 |
Maximum weight uncrated, lbs | 87 |
Dimensions uncrated, pointer and blade guard up, handles in | 68" x 19" x 33.5" |