ICS 890PG Hydraulic PowerGrit Bar and Chain Package
Couldn't load pickup availability
Product Reviews
Product Reviews




Notified by email when this product becomes available

Additional Info
ICS 890PG HYDRAULIC POWERGRIT BAR AND CHAIN PACKAGE
Features & Benefits
- 1' hydraulic whip hose included
- Redesigned rear handle offers improved ergonomic cutting and greater durability
- Requires 20 PSI pressurized water. Do not use standard pump-up water cans as they do not provide enough water. Standard garden hose connection.
- 3 scratch resistant bubble levels for more accurate vertical and horizontal cutting
- New drive sprocket design allows for quick replacement in the field
- New secondary water shut off valve for flow metering and water conservation.
**IMPORTANT INFORMATION**
Proper Chain Tension is very important. Rule of thumb is a diamond chain can be pulled freely around the guide bar by hand easily without binding. Proper chain tension should allow drive links to hang below bar. Click here for full ICS Chain Tension Tip Sheet.
The ICS 890F4 Powerhead is the best way to cut concrete or ductile pipe. With hydraulic there are no fumes, being in tight areas inside or trenches is much safer. Using hydraulic eliminates the problem of fumes while giving more horsepower and torque. When cutting ductile iron use the ICS Pipe Clamp which takes all the weight off the operator holding the saw to make a precise easy cut.
ICS PowerGrit Utility Chainsaws are safer, faster and a lower cost option for cutting ductile iron and cast iron pipe. Designed to change the way contractors cut water and sewage pipe. The 890PG saw comes with Force4 drive sprocket.
MORE INFO AND DESCRIPTION
The ICS 890 Series hydraulic cutting system offers the superior strength of FORCE4® technology. From the redesigned, more durable rear handle, to the easy to replace drive sprocket, this power cutter is engineered to stand up to your toughest jobs. In a package that exceeds industry standards this sleek powerhouse is packed with features designed to make it work as hard as you do.
8 GPM Motor | |
Weight | 27.3 lbs with 15" bar and chain |
Bar length | Up to 25" |
Motor speed | 6,100 rpm |
Powerhead dimensions LxWxH | 23" x 10.5" x 9.5" |
Torque | 122 in-lbs |
Horsepower | 6 hp |
Hydraulic supply | 8 gpm @ 2,500 psi |
Nose level | 107 dB @ 3 ft |
Water supply | Minimum 20 psi |
12 GPM Motor | |
Weight | 27.3 lbs with 15" bar and chain |
Bar length | Up to 25" |
Motor speed | 6,500 rpm |
Powerhead dimensions | 23" x 10.5" x 9.5" |
Torque | 170 in-lbs |
Horsepower | 8 hp |
Hydraulic supply | 12 gpm @ 2,500 psi |
Noise level | 107 dB @ 3 ft |
Water supply | Minimum 20 psi |