Now Accepting
The K 760 Cut-n-Break enables you to cut as deep as 16" from one side. The two high-speed blades make a core in the saw cut, which can then easily be broken off using the accompanying breaking tool. This way you easily work your way through the material, at a very low diamond tool and maintenance cost. Delivered with twin blades and a breaking tool.
Ace Cutting has this saw prepped before shipping. We try our best to adjust the carburetor to meet the location / elevation being shipped. This assures us to see defects or problems before shipping. Our technicians run the saw, empty the fuel and fit back into original packaging.
Applications
Designed to cut deep, using a step-cut method, when you need to make/adjust openings.
Benefits
| Blade, in | 9" |
| Cutting depth, in | 16" |
| Power, hp | 5 |
|
Weight without fuel and blade, lbs |
20.7 |
A new saw typically comes with the EL35 blades made for general purpose cutting. EL10 blades designed for very hard concrete with heavily reinforced rebar to cut through. EL70 blades are complete opposite - made for softer materials such as brick or block.
This gas powered saw is rated at 5 HP - K4000 Cut N Break is rated at 2.4 HP - much faster rate of cut with gas option. Main advantage with electric is the flush cutting ability.
| Blade, in (mm) | 9" (228) |
| Cutting depth, in (mm) | 16" (400) |
| Power, hp (kw) | 5 (3.7) |
| Displacement, cu in (cc) | 4.48 (74) |
| Power / weight ratio, hp/lbs | .24 |
| Weight, without fuel or blade, lbs | 20.7 |
| Fuel Capacity, qt | .95 |
| Air-cooled 2-stroke engine | Yes |
| Active air filtration | Yes |
| X-torq | Yes |
| Smartcarb | Yes |
| Durastarter | Yes |
| Easystart | Yes |
| Fuel indicator in the tank | Yes |
| Wet Kit | Yes |
| Sound power level lwa, db | 113 |
| Sound pressure level, db | 101 |
