FS 400 Propane Conversion Flat Saw

• Ideal of smaller jobs!
• Versatile all-around Flat Saw
• Modified to run on with Propane fuel with Catalytic Converter
• Bladeshaft RPM 2,800
• Maximum depth of cut 6-5/8"
• Poly V-belt for optimal transmission of power
• Blade Control: Screw feed
• Blade coolant: Water supply connector and valve on blade guard
• Depth of cut indicator can be adjusted for different diameter
   blades

Features: Model FS 4000 E Concrete Flat Saw
• Softstart feature gives a controlled start and
   reduces the current spike
• Two-position handle bar for operator comfort
• Compact one-piece unibody frame allows passage
   through a 36" doorway
• Emergency stop switch shuts off power to the
   12-volt system and electric motor control circuit
• 340 HP Lincoln motors features a “Multiguard
   Encapsulated Open Drip Proof Motor”. The stator
   windings are encapsulated by a hot pressure
   extrusion process that provides extra protection for
   the motor against moisture, abrasive dirt, chemicals
   and excessive vibration
• The 40 HP motor draws 50 amps at full load
• The compact one-piece unibody frame (with a jig-
   welded reinforced plate chassis) allows passage
   through a 36" doorway
• 200 FPM maximum travel speed
• Slip-on blade guard with MAGNALOCK™ quick-
   disconnect blade flanges
• Two-position handle bar for operator comfort
• Emergency stop switch shuts off the power to the
  12-volt system, and to the electric motor control
   circuit
• Available with SoftStart only

Model FS 4000 E Specifications
Engine
Motor manufacturer	Lincoln
Motor spec	"Multiguard Encapsulated Open Drip Proof Motor"
Max output	30 kW / 40 hp
Cutting equipment
Blade diameter range, min-max	20-36 "
Diamond blade, max	36 "
Max cutting depth	15 inch
Spindle diameter	1 "
Blade shaft diameter	1.75 inch
Transmission
Axle front	1.5 inch
Rear axle diameter	1.25 inch
Travel speed	Infinite speeds: 0 to 200 fpm
Dimensions
Weight	1100 lbs

Features:Model FS 700 EX Concrete Flat Saw
• The saw is easy to transport since the wheels roll
   freely, independent of one another. They can be
   locked with a pedal, when sawing. This feature can
   also functions as a parking brake when the saw is
   not in use.
• Wheels are mounted on sealed ball
   bearings
• The raise and lower speed, and the advance are
   controlled by the potentiometers on the handlebar
• Poly V-belt for optimal power transmission
• Flush sawing equipment and front pointer as
   accessories

Model FS 700 EX Specifications
Engine
Motor manufacturer	Electric
Max output	7 kW / 9 hp
Cutting equipment
Diamond blade, max	27 "
Max cutting depth	11 inch
Spindle diameter	2.4 "
Blade shaft diameter	0 inch
Dimensions
Weight	344 lbs
Vibration
Hand arm vibration (Aeq)	< 2.5 m/s²