- Diesel Saws
- Gasoline Saws
- Hydraulic Saws
- Electric Saws
- Wall Saws
- Power Packs
HUSQVARNA DIESEL POWERED - CONCRETE SAWS |
|
Get a 12 Month
Interest FREE
Lease on the
Husqvarna Saw
of Your Dreams! |
| |
|
|
Husqvarna Rider Saw - RS 8500 D |
Husqvarna - Model RS 8500 D - Diesel
Large Rider Saw
 |
|
Model RS 8500 D Concrete Rider Saw
Husqvarna RS 8500 D is a powerful, efficient rider saw, specifically designed for large projects with cutting depth up to 250 mm and with upcut configuration standard.
Features:
• The Quick Stick™ one-hand control is used for drive,
control and raising and lowering the blade.
• Blade clutch allows engine operation and saw
movements without blade rotation and assists in
freeing blades stuck in cut.
• The IntelliSeal blade spindle (patent pending) has four
sealed radial bearings for strength and durability.
Allows for a minimum of 500 hour maintenance
intervals and a 1000 hour limited warranty.
• Cummins 85 hp 4-cylinder turbocharged, liquid-cooled,
diesel engine
• Power-assisted zero-turn radius allows the RS 8500 D
to be easily aligned for fast and accurate cutting.
• Tilt steering for increased operator comfort
• Standard light kit for night operation
• New fold-up pointer
• Large fuel tank (75.7 l) for extended operation
• Hydraulic parking brake
Model RS 8500 D Rider Saw |
Engine |
Motor manufacturer |
Cummins |
Motor spec |
B3.3 turbo |
Max output |
63 kW / 85 hp |
Cylinder bore |
3.7 inch |
Fuel tank volume |
20 gal. |
Air filter type |
Multi stage |
Engine cooling |
Liquid /Air |
Cutting Equipment |
Output RPM |
2600 rpm |
Blade diameter range, min-max |
14-26 " |
Diamond blade, max |
0 " |
Max cutting depth |
10 inch |
Spindle diameter |
1 " |
Blade shaft diameter |
2.01 inch |
Transmission |
Axle front |
1.25 inch |
Rear axle type |
Single rear wheel drive system |
Transmission speed |
0-32.31 fpm |
Dimensions |
Weight |
2050 lbs |
|
|
Husqvarna Concrete Flat Saw - FS 6600 D |
Husqvarna - Model FS 6600 D - Diesel
Large Walk Behind
Flat Saw
3-Speed Gear Box
|
|
Features: Model FS 6600 D Concrete Flat Saw
• 66 HP John Deere 4-cyl. turbocharged diesel engine
• The Quick Stick™ one-hand control is used for drive,
control and raising and lowering the blade.
• Blade clutch allows engine operation and saw
movements without blade rotation and assists in
freeing blades stuck in cut.
• Patented power transmission system with right-angle
gearbox and 16 V-belts for optimum power transfer
• Hydraulic parking brake
• Patent-pending electric tracking system reduces
operator fatigue and requires no tool
| Model FS 6600 D Specifications |
Engine |
Motor manufacturer |
John Deere |
Motor spec |
4024 TF 270 |
Max output |
49 kW / 66 hp |
Cylinder displacement |
146 cu.inch |
Cylinder bore |
3.39 inch |
Fuel tank volume |
9.75 gal. |
Air filter type |
Multi stage |
Engine cooling |
Liquid /Air |
Cutting Equipment |
Blade diameter range, min-max |
18-42 " |
Diamond blade, max |
40 " |
Max cutting depth |
17.5 inch |
Spindle diameter |
1 " |
Blade shaft diameter |
2 inch |
Transmission |
Axle front |
1 inch |
Rear axle type |
4-bolt hub mount |
Transmission speed |
0-30.48 fpm |
Dimensions |
Weight |
1888 lbs |
Weight incl. packaging |
1985 lbs |
Sound and noise |
Sound power level, LWA |
119 dB(A) |
Sound pressure |
94.8 dB(A) |
Vibration |
Hand arm vibration (Aeq) |
< 3.6 m/s² |
|
|
Husqvarna Concrete Flat Saw - FS 4800 D |
Husqvarna - Model FS 4800 D - Diesel
Large Walk Behind
Flat Saw
3-Speed Gear Box!
 |
|
Features: Model FS 4800 D Concrete Flat Saw
• The Quick Stick™ one-hand control is used for drive,
• control and raising and lowering the blade
• Our larger road saws are equipped with powerful
turbo diesel engines, and are designed to provide
more power at the blade spindle, which increases
efficiency in all kinds of sawing job.
• Engine also has low vibration levels, for more
comfortable operation
• All our saws have a compact and well-balanced
design with a low profile that makes them easy to
handle and transport.
• Blade clutch allows engine operation and saw
movements without blade rotation and assists in
freeing blades stuck in cut.
• The IntelliSeal blade spindle (patent pending) has
four sealed radial bearings for strength and
durability. Allows for a minimum of 500 hour
maintenance intervals and 1000 hr. limited warranty.
• Yanmar 48 hp 4-cylinder turbocharged diesel engine
• Liquid-cooled
• 12 belts from engine to blade
• Front pivot version has a patent-pending electric
tracking system, allows adjustments while cutting.
• The rear pivot version is equipped with electrically
controlled hydraulic differential system locking rear
wheels for positive traction to prevent slipping.
• Fully equipped control panel
• Very efficient transmission (12 belts from engine to
blade), these saws offer a big 42 hp at the
blade spindle, for high cutting speed and capacity.
| Model FS 4800 D Specifications |
Engine |
Motor manufacturer |
Yanmar |
Motor spec |
TNV88 |
Max output |
35 kW / 48 hp |
Cylinder bore |
3.5 inch |
Fuel tank volume |
7.79 gal. |
Air filter type |
Multi stage |
Engine cooling |
Liquid /Air |
Cutting Equipment |
Output RPM |
3000 rpm |
Diamond blade, max |
30 " |
Max cutting depth |
11.8 inch |
Spindle diameter |
1 " |
Blade shaft diameter |
2 inch |
Bladeshaft drive |
3-Speed inline gear box |
Transmission |
Axle front |
1 inch |
Rear axle type |
hydraulic |
Transmission speed |
0-9.14 fpm |
Dimensions |
Weight |
1622 lbs |
Sound and noise |
Sound power level, LWA |
113 dB(A) |
Sound pressure |
91 dB(A) |
Vibration |
Hand arm vibration (Aeq) |
< 3.6 m/s² |
|
|
| |
HUSQVARNA GASOLINE POWERED - CONCRETE SAWS |
Husqvarna Concrete Flat Saw - FS 6500 |
Husqvarna - Model FS 6500 - Gasoline
Walk Behind
Flat Saw
 |
|
Features: Model FS 6500 Concrete Flat Saw
• The Quick Stick™ one-hand control is used for drive,
control and raising and lowering the blade
• Cutting depth indicator shows depth of blade in
the
cut
• 65 HP Wisconsin V465 2-cycle Gas engine delivers
42 HP at the bladeshaft
• Blade guard has a single, vertical slip on tab for easy
removal and allows right or left side mounting for
multiple cutting applications
• Vertically mounted water tubes with single large
opening for superior blade cooling
• Sealed ball bearing, maintenance-free polyurethane
front wheels and quick disconnect rear wheels for
easy maintenance
• Eaton model 10 hydrostatic drive with chain and gear
reduction drive system provides infinite speeds from
0 to 200 fpm
• Positive depth stop prevents saw blade from being
lowered past pre-set depth
• Cutting depth indicator clearly shows depth of blade in
the cut and is adjustable for all blade diameters
• Voltmeter and oil pressure gauges for monitoring
engine systems
• Switch controlled water safety device shuts engine off
when water pressure drops to protect the blade
• Lowering valve adjusts feed rate when lowering blade
in cut
• Single lever for forward/reverse, raise/lower offers
reliable and infinite variable ground speed control and
allows the blade to be quickly raised and lowered
• Separate neutral engage lever is mounted on the cowl
and allows for quick disengage of transmission for
ease
in transport
| Model FS 6500 Technical Specifications |
Engine |
Motor manufacturer |
Wisconsin Gas Engine |
Motor spec |
V465 |
Max output |
49 kW / 65 hp |
Fuel tank volume |
9 gal. |
Air filter type |
4-stage |
Cutting equipment |
Blade diameter range, min-max |
14-36 " |
Diamond blade, max |
35 " |
Max cutting depth |
15 inch |
Spindle diameter |
1 " |
Blade shaft diameter |
1.75 inch |
Transmission |
Axle front |
1.5 inch |
Rear axle diameter |
1 inch |
Travel speed |
Infinite speeds: 0 - 200 FPM |
Dimensions |
Weight |
1300 lbs |
|
|
Husqvarna Concrete Flat Saw - FS 3800 G |
Husqvarna - Model FS 3800 G - Gasoline
Walk Behind
Flat Saw
|
|
Features: Model FS 3800 G Concrete Flat Saw
• The Quick Stick™ one-hand control is used for drive,
control and raising and lowering the blade
• User friendly operator console with reliable,
easy-to-use controls
• High torque 37 HP Wisconsin 2-cycle Gas engine
• User friendly operator console with reliable,
easy-to-use controls
• Blade capacity available up to 36".
| Model FS 3800 G Technical Specifications |
Engine |
| Motor manufacturer |
Wisconsin Gas Engine |
| Max output |
28 kW / 37 hp |
| Fuel tank volume |
9 gal. |
| Air filter type |
4-stage |
Cutting equipment |
| Blade diameter range, min-max |
14-36 " |
| Diamond blade, max |
36 " |
| Max cutting depth |
15 inch |
| Spindle diameter |
1 " |
| Blade shaft diameter |
1.75 inch |
Transmission |
| Axle front |
1.5 inch |
| Rear axle diameter |
1 inch |
| Travel speed |
Infinite speeds: 0 - 200 FPM |
Dimensions |
| Weight |
1300 lbs |
|
|
|
HYDRAULIC - POWER CUTTER SAWS |
Husqvarna Hydraulic Cut-Off Saw - K2500 |
Husqvarna - Model K2500 - Hydraulic
|
|
Features: Model K2500 Power Cutter Saw
• Hydraulic gear motor
• Blade brake
• Servo for motor speed control
• Reversible cutting arm
• Easy
working closer to walls and the ground
• The flow can be adjusted during operation
• Water nozzle is optimally positioned
• Replaceable arbor bushing
• Capacity for 400 mm blade
• High power output with hydraulic operation, 5.2 kW
• Servo for motor speed control
• Blade brake
• Reversible cutting arm.
• Perfect balance for horizontal cutting
• Wet cutting kit is standard
| Technical Specifications |
K2500 Hydraulic |
| Item No. |
968365401 |
| Motor |
Hydraulic gear motor
|
| Horsepower- hp (kW) |
7 (5.2) |
| Max Pressure - psi (bar) |
2,500 (170) |
| Max Flow- gal/min (I/min) |
10.5 (40) |
| Recommended flow rate |
10 gal/min |
| Blade diameter - in. (mm) |
16 (400) |
| Cutting Depth - in. (mm) |
6 (145) |
| Weight w/o blade |
18.3 lbs. |
|
|
Husqvarna Hydraulic Cut-Off Saw - K3600 |
Husqvarna - Model K3600 - Hydraulic
|
|
Features: Model K3600 Power Cutter Saw
• Hydraulic gear motor
• Peripheral drive
• Adjustable front handle
• Automatic start for water flow
• 260 mm cutting depth with 350 mm blade
• Unique eccentric drive
• Stable support rollers for easy adjustblade change
• Sealed drive and roller system
• Adjustable front handle
• Integrated, convenient water adjustment
• Large lower spray guard and integrated support foot
• Low weight and ergonomic design
• Supplied with grease gun to grease the guide rollers
• Simple service and cleaning
| Technical Specifications |
K3600 Hydraulic |
| Item No. |
968424101 |
| Motor |
Hydraulic gear motor
|
| Max Pressure - psi (bar) |
2,500 (170) |
| Recommended flow rate |
10 gal/min |
| Blade diameter - in. (mm) |
14 (350) |
| Cutting Depth - in. (mm) |
10 (260) |
| Weight w/o blade |
17.8 lbs. |
|
|
|
ELECTRIC - CONCRETE SAWS |
Husqvarna Concrete Flat Saw - FS 4000 E |
Husqvarna - Model FS 4000 E - Electric
High Production Indoor Work
|
|
Features: Model FS 4000 E Concrete Flat Saw
• Softstart feature gives a controlled start and
reduces the current spike
• Two-position handle bar for operator comfort
• Compact one-piece unibody frame allows passage
through a 36" doorway
• Emergency stop switch shuts off power to the
12-volt system and electric motor control circuit
• 340 HP Lincoln motors features a “Multiguard
Encapsulated Open Drip Proof Motor”. The stator
windings are encapsulated by a hot pressure
extrusion process that provides extra protection for
the motor against moisture, abrasive dirt, chemicals
and excessive vibration
• The 40 HP motor draws 50 amps at full load
• The compact one-piece unibody frame (with a jig-
welded reinforced plate chassis) allows passage
through a 36" doorway
• 200 FPM maximum travel speed
• Slip-on blade guard with MAGNALOCK™ quick-
disconnect blade flanges
• Two-position handle bar for operator comfort
• Emergency stop switch shuts off the power to the
12-volt system, and to the electric motor control
circuit
• Available with SoftStart only
Model FS 4000 E Specifications |
Engine |
| Motor manufacturer |
Lincoln |
| Motor spec |
"Multiguard Encapsulated Open Drip Proof Motor" |
| Max output |
30 kW / 40 hp |
Cutting equipment |
| Blade diameter range, min-max |
20-36 " |
| Diamond blade, max |
36 " |
| Max cutting depth |
15 inch |
| Spindle diameter |
1 " |
| Blade shaft diameter |
1.75 inch |
Transmission |
| Axle front |
1.5 inch |
| Rear axle diameter |
1.25 inch |
| Travel speed |
Infinite speeds: 0 to 200 fpm |
Dimensions |
| Weight |
1100 lbs |
|
|
Husqvarna Concrete Flat Saw - FS 700 EX |
Husqvarna - Model FS 700 EX - Electric
High Production Indoor Work
|
|
Features:Model FS 700 EX Concrete Flat Saw
• The saw is easy to transport since the wheels roll
freely, independent of one another. They can be
locked with a pedal, when sawing. This feature can
also functions as a parking brake when the saw is
not in use.
• Wheels are mounted on sealed ball
bearings
• The raise and lower speed, and the advance are
controlled by the potentiometers on the handlebar
• Poly V-belt for optimal power transmission
• Flush sawing equipment and front pointer as
accessories
Model FS 700 EX Specifications |
Engine |
| Motor manufacturer |
Electric |
| Max output |
7 kW / 9 hp |
Cutting equipment |
| Diamond blade, max |
27 " |
| Max cutting depth |
11 inch |
| Spindle diameter |
2.4 " |
| Blade shaft diameter |
0 inch |
Dimensions |
| Weight |
344 lbs |
Vibration |
| Hand arm vibration (Aeq) |
< 2.5 m/s² |
|
|
Husqvarna Concrete Flat Saw - FS 3500 E |
Husqvarna - Model FS 3500 E - Electric
Small to Medium Jobs
|
|
Features: Model FS 3500 E Concrete Flat Saw
• Softstart feature gives a controlled start and reduces
the current spike
• Two-position handle bar for operator comfort
• Compact one-piece unibody frame allows passage
through a 36" doorway
• Emergency stop switch shuts off power to the 12-volt
system and electric motor control circuit
• Fully enclosed transmission
• Slip-on blade guard has an auto latch to clamp the
guard securely to the saw for added safety
• Arbor guard / nose latch and a blade guard handle
are standard
• Accommodates slip-on blade guards up to 30"
• Sealed ball bearing, maintenance-free polyurethane
front wheels and covered rear wheels
• One-piece water manifold with multiple jets.•Lift bail
is
standard
• Box frame is the most rigid available and provides
long life and less stress on the bladeshaft and bearings
• Turbo-style cyclone pre-cleaner reduces filter
maintenance
• Dual arbors allow the blade to be mounted on either
end of the bladeshaft for right or left cutting
• For maximum engine protection, the air filter has a
progressive restriction indicator
• 30 HP SoftStart electric model requires less starting
amperage
Model FS 3500E Specifications |
Engine |
| Motor manufacturer |
Lincoln |
| Motor spec |
ODP Encapsulated |
| Max output |
22 kW / 30 hp |
Cutting equipment |
| Blade diameter range, min-max |
26-36 " |
| Max cutting depth |
12 inch |
| Spindle diameter |
1 " |
| Blade shaft diameter |
1.8 inch |
Transmission |
| Axle front |
1 inch |
| Rear axle diameter |
1 inch |
| Travel speed |
Infinite speeds: 0 - 220 FPM |
Dimensions |
| Weight |
9.027 lbs |
| Weight incl. packaging |
1000 lbs |
|
|
| |
CONCRETE CUTTING - WALL SAWS |
Husqvarna Concrete Wall Saw WS 463 |
Husqvarna - Wall Saw WS 463 - Hydraulic
Built on a Modular System
|
|
Features: Model WS 463 Wall Saw
• The universal mounting enables stair cutting
• With the universal mounting, dovetail cutting is
possible
• Built on a modular system, the saws are easy to
carry thanks to the optimised weight of each module.
• The weight is also evenly distributed between rail
and saw head, so the carriage stays on the track
• 360 degree rotating arm allows the operator to saw
at full depth the entire length of the track
• 20 kW (26.8 hp) true spindle output at saw head
• Advanced hydraulic control
• Patented hydraulic gear, 3 speeds
• Supplied with 4 wall mounting brackets, track
trolley, tool kit, track holder and blade guard guide
| Model WS 463 Specifications |
Engine |
Power requirement |
26.8 hp |
Hydraulic flow |
17.2 gal/min |
Hydraulic pressure |
230 bar |
Carriage and track |
Weight, carriage |
48.9 lbs |
Weight, track section |
short: 26.7 lbs; long: 41.1 lbs |
Cutting equipment |
Output RPM, position 1 |
630 rpm |
Output RPM, position 2 |
1000 rpm |
Output RPM, position 3 |
1400 rpm |
Blade diameter range, min-max |
24-63 " |
Max cutting depth |
29 inch |
Max starter blade |
39 inch |
|
|
Husqvarna Concrete Wall Saw WS 325 |
Husqvarna - Wall Saw WS 325 - Hydraulic
The All Around Wall Saw
|
|
Features: Model WS 325 Wall Saw
• 360 degree rotating arm allows the operator to saw
at full depth the entire length of the track
• The saw carriage is advanced manually with a
telescopic and flexible crank
• A small hand crank controls the blade depth
adjustment
• Central flushing through the blade flange provides
efficient cooling with limited water spillage
• Low weight and combined lifting and locking handles
ensure that it can easily be secured to the track
• Supplied with; saw unit, feed handle, 4 mounting
brackets, track coupling, oil and NV18 flex head
wrench, carry cases. Also included are blade guard
with carry case, track sections, telescopic feed handle
and carry case for track and feed handle
| Model WS 325 Specifications |
Engine |
| | |
