A-101 Pulse Vac

Unlike other industrial vacuums, the A-101 Pulse-Vac is designed specifically for the removal of fine dust and powders without clogging. By using time tested proven technology of compressed
air to pulse clean the filter (which has become the most efficient
means of cleaning filters), the A-101 Pulse Vac is the only portable vacuum in the market to use a compressed air pulsation system to continually flush the dust and debris. 

The A-101 Pulse Vac is perfect for clean up around job sites or
as a dust collection system for your surface preparation equipment.

The Pulse Vac is designed with a lower center of balance to
prevent tip over and a powder coated 16-gallon steel drum for
easy dumping.

The A-101 Pulse Vac operates on a standard 110 volt
20 amp outlet.

After being in production since 1996 with thousands of satisfied customers, we have such confidence in the performance of our
A-101 Pulse Vac that we are only manufacturer to offer a money
back guarantee. 

A-404G Pulse Vac

The A-404G Pulse Vac has been designed for the contractor who requires large amounts of dust containment. The A-404G has four primary filters that are pulsed clean with a reversed charge of compressed air every 6 seconds to give you continuous vacuum.

The A-404G Pulse Vac has Two 5” hose inlets allowing large air volume and an adapter pipe to run Five 2” hoses for smaller hand tools.

The A-404G collector can hold a full 55-gallon drum of material
up to 1000 lbs. It has an easy latch down drum strap allowing
youto use any 55-gallon drum. The operator has the ability to lift
the collector drum with a forklift truck through the chain pivots for easy dumping.

Optional motor choices of 220V, 460V, and gasoline engine.

With your reduction in filter cleaning labor combined with it’s adaptability to all shrouded equipment, The A-404G Pulse Vac
is the most essential and recommended dust collector system for today’s contractor.