Diamond Core Drilling Rigs ACE Cutting Equipment Novi, Michigan

CORE DRILL RIGS & DRILLS
CORE CUT - CORE DRILLING EQUIPMENT
CORE CUT - Model M-1 - Electric Combination Rig	M-1 Complete Combination Rig " to 10" bit capacity (14" with a spacer block) Dual switch/outlet control panel & amp meter Slide handle allows drilling in tight areas Streamlined base and carriage 2-1/2" square column with black oxidized finish Quick changeover from vacuum to anchor base 6" wheels for better mobility Complete Combination Rig Includes:Anchor/vacuum base, mast, carriage, control panel, vacuum pump, ceiling jack, motor mount plate and your choice of drill motor:Core Bore, Milwaukee or Weka

CORE CUT - Model M-2 - Electric Combination Rig	M-2 Complete Combination Rig Dual switch/outlet control panel & amp meter 4-spoke handle Precision ground & chrome plated 2-7/8" square mast Quick changeover from vacuum to anchor base 10" bit capacity (up to 36" with spacers) 6" wheels for better mobility Complete Combination Rig Includes:Combo anchor/vacuum base, mast, carriage, control panel, vacuum pump, ceiling jack, motor mount plate and your choice of Core Bore, Milwaukee or Weka drill motors.

CORE CUT - Model M-4 - Electric Complete Core Rig	M-4 Complete Core Rig Weighs only 35 pounds 6" bit capacity (3" handheld) Converts to hand held drill motor in seconds Combination stand quickly angles to 45 degrees Mast can rotate 360 degrees on swivel base Reversible slide handle - use left or right side drilling High strength, hard anodized, 1-1/2" x 2" aluminum mast 4 adjustable slide bearings provide superior carriage rigidity Carriage lock M-4 Complete Rig Includes: Vacuum base, vacuum pump, mast, slide carriage, slide feed handle, motor mount, top carrying handle, carriage lock, you choice of Weka handheld or Milwaukee drill motors. Anchor Rig Includes: Anchor base, mast, slide carriage, slide feed handle, motor mount, top carrying handle, carriage lock, you choice of Weka handheld or Milwaukee drill motors.

CORE CUT - Model M-5 - Electric Combination Rig	M-5 Combination Rig 12 inch bit capacity (up to 36" with spacers or pillow block) Easy quick disconnect motor mount Angle drilling capability up to 45 degrees Easily adjustable slide bearings Longer columns available up to 60 inches Quick release vacuum button Extruded all aluminum lightweight column built with strength and hard anodized for wear Double column support for increased stability Positive carriage lock 4-spoke sliding handle can be used on either side Convenient carrying handle (ceiling jack available) M-5 Combination Rig Includes: Vacuum base, angle support bars, base wheels, single switch control panel, slide carriage, 4-spoke handle, carrying handle and choice ofWeka, Milwaukee, Core Bore, hydraulic or air motors.

	Weka DK-12 • 35 lb. 6" Bit Max • Fast, chip free drilling with low power • 14 amp - Electronic overload • 580/1400/2900 RPM • Side handle and Case included • 5/8-11 and 1.250-7

DRY CORE DRILL BITS

DRY CORE BITS

Heavy Duty Dry Hole Saw - Premium Dry Hole Saw - Dry Vacuum

Heavy Duty Dry Hole Saw

Our Dry Hole Saw bits are the best in the business. We were the first to introduce them and nobody sells more. Drill dry through block and brick in seconds. No water needed. All bits have 5/8"-11 threaded hubs. Dry bits have 9" drilling depth. Jacobs Chuck Adaptor available for hammer drills 5/8"-11 thread to straight shank.

SPECIFICATION

DH - Block and soft brick

Notes: Not all types of brick and block can be drilled. Please consult factory. Not suitable for concrete or hard materials.

Dry Hole Saw Accessories
Part Description	Catalog #
1/2" x 12" carbide drill starter bit with "A" taper shank for 5/8"-11 hub	00033
5/8"-11 female to 5/8"-11 male pilot adaptor	01902

Premium Dry Hole Saw

Premium black grade dry hole saw bits feature wider segments than the heavy duty grade with a heavier core thickness. They drill faster and last longer than any bit of its kind.

SPECIFICATION

DP - Brick and block

Notes: Not all types of brick and block can be drilled. Please consult factory. Not suitable for concrete or hard materials.

Dry Vacuum Bit

Designed for drilling dry in cured concrete, brick and block. Use on standard core drill motors or high speed grinders. This bit takes up where the Dry Hole Saw leaves off. All bits have 1.250"-12 threaded hubs. All bits have a 9" drilling depth.

SPECIFICATION

DVH - Cured concrete, brick & block

Notes: Do not use in applications with steel heavier than wire mesh. Air vacuum swivel assembly needed to adapt to drill motors.

Dry Vacuum Accessories
Part Description	Catalog #
Air vacuum swivel assembly 5/8"-11 to 1.250"-12 threads	01950
12" air vacuum extension	01951

WET CORE DRILL BITS

WET CORE BITS

Heavy Duty Wet Hole Saw - Super Premium Wet Hole Saw

Standard Gold

An excellent general purpose bit with good diamond concentration for fast drilling. Designed for the occasional driller with average to light duty wet drilling.

SPECIFICATIONS

SMF - General purpose, fast drilling

SHL - Asphalt/block, long life

Heavy Duty Orange

The Heavy Duty Orange is our most popular bit. It has a high diamond concentration for excellent footage and drilling speed. Designed for all types of wet drilling in applications with light to moderate steel.

SPECIFICATIONS

H33F - Hard aggregate

HOL - General purpose, fast drilling

H64L - Asphalt/block, long life

Premium Black

Our Premium Black bit is the industry standard. Its very high diamond concentration gives maximum footage and drilling speed. Designed for all types of wet drilling. Good in moderate to high steel applications.

SPECIFICATIONS

P33F - Hard aggregate

POL - General purpose, fast drilling

P64L - Asphalt/block, long life

Impregnated Yellow

The Impregnated Yellow was our first bit made with synthetic diamonds. It works well in applications with prestressed cable, loose rebar and loose wire mesh.

SPECIFICATIONS

B - General purpose

Supreme Silver

The Supreme Silver bit has our highest diamond concentration for the most demanding of situations. This bit is designed for drilling smaller holes in applications with very heavy steel or extremely hard aggregate.

SPECIFICATIONS

U33F - Extremely hard aggregate

U38Z - Hard aggregate

UOL - Cured concrete with high steel

Pro Blue

The Pro Blue bit has a higher diamond concentration than our Premium Black bit. When you combine this high concentration with its wide spaced segments, you get a tough bit that drills very fast in heavy steel and hard aggregate applications.

SPECIFICATIONS

TOD - Hard aggregate, heavy steel

TOL - Fast drilling, heavy steel

Super Premium Red

The Super Premium Red bit is built for fast drilling and long life in moderate to heavy steel applications. It has our wide spaced segment design with the tallest segments we make, (.400"). Expect high performance and long life drilling when you choose Super Premium Red

SPECIFICATIONS

SPOD - Hard aggregate, heavy steel

SPOL - Fast drilling, heavy steel

Heavy Duty Orange Turbo

Our Heavy Duty Orange Turbo bit has high diamond concentration for excellent speed in moderate to heavy steel applications. This bit is one of the fastest general purpose bits available.

SPECIFICATIONS

THOWF - General purpose, moderate steel

THOWL - General purpose, heavy steel

Premium Black Turbo

The Premium Black Turbo is our most popular turbo bit. It has a very high diamond concentration for excellent performance in heavy to very heavy steel applications. Combine this excellent diamond concentration with its fluted segment design and you have a bit that flies through just about anything.

SPECIFICATIONS

TPOWF - General purpose, heavy steel

TPOWL - General purpose, high steel

Super Premium Plus Turbo

The Super Premium Plus Turbo bit has an extra-high diamond depth of .400". These bits last longer and drill faster than most turbo bits. The specially designed segments last throughout the entire life of the bit. Various specifications are available for hard aggregate to abrasive asphalt.

SPECIFICATIONS

SP33L - Hard aggregate, fast cutting, long life

SPOL - General purpose, fast cutting, long life

SP64L - Asphalt, fast cutting, long life

Pre Cast

Our Pre Cast core bits are made with half length, closely spaced segments to fill in gaps that resist segment failure from pre-tensioned wire and cable. Available in both Heavy Duty Orange and Premium Black quality grades.

SPECIFICATIONS

HOL - General purpose, light steel/pre-tensioned wire

POL - General purpose, light steel/pre-tensioned wire, long life

Thinwall Handheld Bits

Designed for fast, chip free drilling with low power, high speed drill motors. The continuous diamond crown is great for precise, smooth holes in thin or brittle materials. Available in Premium Black and Supreme Silver quality grades. Bits have 5/8"-11 threaded hubs.

SPECIFICATIONS

POF - General purpose

UOF - General purpose, long life

CORE DRILLING ACCESSORIES

CONTROL PANELS & VACUUM PUMPS

Single Switch Control Panel/Amp Meter

• One switch for both outlets• Dual outlet - one for motor, one for vacuum• Amp meter has three red lines; 15, 18 and 20 amp

• 110 or 220 volt models

Dual Switch Control Panel/Amp Meter

• Two switches - one for drill motor, one for vacuum pump• Dual outlet - one for drill motor, one for vacuum pump• Amp meter has three red lines; 15, 18 and 20 amp

• 110 or 220 volt models

Optional On/Off Switch

• Basic on/off toggle switch for your Core Bore or Milwaukee drill motor

• Can be mounted directly on the top of the motor

Core Drill Vacuum Pump

• Gast brand vacuum pumps mount easily and run quietly

• Pumps available for Core Bore rigs: M-1, M-2, M-3, M-4, M-5 and the
All Purpose Vacuum Base• Adjustable vacuum gauge• Replaceable vacuum muffler

• Includes vacuum hose and connection

RE-SEGMENTED DIAMOND CORE DRILL BITS

ACE Cutting Saves Money by having your used Core Drill Barrels Re-Tipped...

• Retipping is the re-manufacturing of a core bit where the old tool piece is used and
refurbished with new diamond segments. This is economical only on larger sizes,
usually 6" diameter or larger.
• Most core drill barrels of any size that are in good condition can be re-tipped
• The barrel is re-machined to insure a "true" running bit
• New segments are bonded to the barrel
• You can select different segment types for better performance

Image not Available